Print Page | Close Window

URGENT! PostSharp licensing problem!

Printed From: IdeaBlade
Category: DevForce
Forum Name: DevForce 2010
Forum Discription: For .NET 4.0
URL: http://www.ideablade.com/forum/forum_posts.asp?TID=3013
Printed Date: 13-May-2026 at 6:18pm


Topic: URGENT! PostSharp licensing problem!
Posted By: s_tristan
Subject: URGENT! PostSharp licensing problem!
Date Posted: 15-Oct-2011 at 10:40am
While compiling project I receive 2 issues:
1. Error: The aspect 'IdeaBlade.Aop.ProvideEntityAspect' uses non-licensed features (Aspect Inheritance). Please visit http://www.sharpcrafters.com/ to acquire a license of PostSharp
2. Warning: Warning: This project includes a feature that is not covered by the current license. Please visit http://www.sharpcrafters.com/ to get a license.


Replies:
Posted By: DenisK
Date Posted: 17-Oct-2011 at 11:23am
Hi s_tristan;

We suspect that you might have downloaded an earlier RTW build. We saw this error during our testing and it has been fixed in the final release. How did you get your 6.1.3 installer?

Posted By: s_tristan
Date Posted: 17-Oct-2011 at 11:25am
I have downloaded from Trial link (after filling the registration form)

Posted By: DenisK
Date Posted: 17-Oct-2011 at 12:05pm
Could you try using this installer instead? You have to remove the current version first and then reinstall with this installer.

www.ideablade.com/friends/DF2010.setup.6.1.3.exe

Posted By: s_tristan
Date Posted: 17-Oct-2011 at 1:12pm
I reinstalled and still have the same problems

Posted By: s_tristan
Date Posted: 17-Oct-2011 at 1:19pm
Ops!
Problem solved when I registered PostSharp free Starter license. If this a normal behavior?

Posted By: DenisK
Date Posted: 17-Oct-2011 at 1:37pm
No it's not. Can you tell us what PostSharp version you're using? You can find that out on the Add Remove Programs in your Control Panel.

Posted By: s_tristan
Date Posted: 17-Oct-2011 at 1:39pm
2.1.4.2

Posted By: DenisK
Date Posted: 17-Oct-2011 at 1:43pm
Another suspicion that we have is that it might be something to do with how you're defining your Code First model. Will it be possible for you to send your project to us? You can send it to IdeaBladeSupportTrack@ideablade.com and reference this forum post. Thanks.

Posted By: s_tristan
Date Posted: 17-Oct-2011 at 1:56pm
I was sent the attached project

Posted By: DenisK
Date Posted: 18-Oct-2011 at 11:18am
We've found that this is a bug on our part. We're in the process of fixing this and releasing 6.1.3.1 as soon as possible. We'll update this post when 6.1.3.1 has been pushed out.

Posted By: stephenmcd1
Date Posted: 19-Oct-2011 at 11:46am
Does this bug only affect Code First models or will it affect anyone using 6.1.3.0?  I'm considering upgrading but I'll wait for 6.1.3.1 if I'm going to run into this bug (we aren't doing any code first)

Posted By: DenisK
Date Posted: 19-Oct-2011 at 11:49am
It only affects Code First models but I suggest that you wait for 6.1.3.1. It should be up soon.

Posted By: DenisK
Date Posted: 19-Oct-2011 at 1:33pm
6.1.3.1 is now up.

Posted By: s_tristan
Date Posted: 19-Oct-2011 at 4:06pm
 where I can download this version. The trial is still is 17.10.2011

Posted By: DenisK
Date Posted: 20-Oct-2011 at 11:01am
Could you try again? I just tested it and can confirm that it's 6.1.3.1.

Posted By: s_tristan
Date Posted: 20-Oct-2011 at 3:32pm
Yes, I have downloaded, installed and tested without any problem


Print Page | Close Window