Print Page | Close Window

"Wizard was Interrupted” Message During Install

Printed From: IdeaBlade
Category: DevForce
Forum Name: DevForce Classic
Forum Discription: For .NET 2.0
URL: http://www.ideablade.com/forum/forum_posts.asp?TID=26
Printed Date: 31-Mar-2025 at 6:03pm


Topic: "Wizard was Interrupted” Message During Install
Posted By: Customer
Subject: "Wizard was Interrupted” Message During Install
Date Posted: 30-May-2007 at 5:37pm

I have been unable to install – the installation states it has been interrupted before it could be fully installed.


Replies:
Posted By: IdeaBlade
Date Posted: 30-May-2007 at 5:49pm

From the Troubleshooting section of the Installation Guide:

If you get a message saying that the “wizard was interrupted”, you probably have run into a Windows SP2 operating system security issue.  To fix this problem, read the Macrovision Knowledge Base article at:

http://support.installshield.com/kb/view.asp?articleid=Q111303 - http://support.installshield.com/kb/view.asp?articleid=Q111303
 You might also be interested in reading:
http://episteme.arstechnica.com/groupee/forums/a/tpc/f/99609816/m/959005056731 - http://episteme.arstechnica.com/groupee/forums/a/tpc/f/99609816/m/959005056731


Print Page | Close Window