Print Page | Close Window

[SOLVED] DevForce Update to 3.5.5.1

Printed From: IdeaBlade
Category: DevForce
Forum Name: DevForce Classic
Forum Discription: For .NET 2.0
URL: http://www.ideablade.com/forum/forum_posts.asp?TID=601
Printed Date: 11-Jun-2026 at 12:22pm


Topic: [SOLVED] DevForce Update to 3.5.5.1
Posted By: Linguinut
Subject: [SOLVED] DevForce Update to 3.5.5.1
Date Posted: 11-Dec-2007 at 11:42am
The only problem that I am having in the CAB/DF application with the latest update is the IdeaBlade.UI.Winforms.DexExpressControls namespace.  It does not seem to be recognized.  Was there a breaking change to the assembly?



Replies:
Posted By: Linguinut
Date Posted: 11-Dec-2007 at 11:55am
Fixed!
 
Tip:  Do not simply rebuild the app with the new assemblies.  In the case of a faulting assembly, remove it, re-add it, then rebuild.  All should be ok after that.  At least, it was in this instance.  My CAB/DF app is now using DevForce 3.5.5.1 and DevExpress 7.2.3.


Posted By: davidklitzke
Date Posted: 11-Dec-2007 at 2:13pm
I suspect that all you may need to do is to set the "SpecificVersion" property of the reference to "False".  By the way, this is something that you should need to do only once.


Posted By: Linguinut
Date Posted: 11-Dec-2007 at 2:49pm

The assembly shows 'false' as the SpecificVersion setting; however, I did not need to change it.  It was 'false' by default.  It may not have been set to that before I readded the assembly, though.  I did not check that property before doing that.

Thanks,
Bill



Print Page | Close Window